Technology-supported Engineering Design and Problem Solving for Elementary Students

Authors

DOI:

https://doi.org/10.46328/ijtes.406

Keywords:

technology-supported learning, engineering design, educational technology, after-school programs, disciplinary tools, case study

Abstract

This study investigated the technologies and tools used to support upper-level elementary students’ engineering design and problem-solving activities in a bridge design and building challenge. The study was conducted in an eight-week after-school program with a total of 36 4th to 6th grade students in small groups of four to six students. Analysis of students’ group work based on video recordings revealed the use of a variety of technologies and tools. The results show that the use of technology was engaging and critical for helping students solve the engineering design problem and complete the design challenge. The use of disciplinary tools such as shake tables which are typically used by professionals also allowed students to perform certain tasks like professional engineers. Student focus group interviews showed students enjoyed the use of various technologies and tools during the design challenge. The study has implications for using technology to support K-12 students’ engineering design and problem-solving activities, which include the authentic use of technologies and tools can transform learning and support critical problem solving and design thinking. The study also provides an example for instructors on how to use various technologies to engage and motivate students in hands-on engineering design tasks.

Author Biographies

Dazhi Yang, Boise State University

Dazhi Yang is professor in the Educational Technology Dept. with a joint/adunct appoitment in the College of Enginering at Boise State Unveriisty. Dr. Yang's current research focuses on engineering and computing education and technology-supported STEM education.

Bhaskar Chittoori, Boise State University

Bhaskar Chittoori is an associcate professor and department chair in the Civil Engineering Dept. at Boise State University.

References

Yang, D., & Chittoori, B. (2022). Technology-supported engineering design and problem solving for elementary students. International Journal of Technology in Education and Science (IJTES), 6(4), 524-542. https://doi.org/10.46328/ijtes.406

Downloads

Published

2022-11-26

Issue

Vol. 6 No. 4 (2022)

Section

Articles

License

Makaleler araştırma, öğretim ve özel çalışma amaçları için kullanılabilir. Yazarlar yalnızca makalelerinin içeriğinden sorumludur. Dergi makalelerin telif hakkına sahiptir. Yayımcı, araştırma materyalinin kullanımıyla doğrudan veya dolaylı olarak bağlantılı olarak veya bundan kaynaklanan herhangi bir kayıp, eylem, talep, işlem, talep veya maliyet veya zarardan sorumlu tutulamaz.

Bir makalenin yazarı(ları), makalenin dergide yayınlanmak üzere kabul edilmesi durumunda, yayınlanan makalenin Creative Commons “Atıf 4.0 Uluslararası” lisansı kullanılarak telif hakkına sahip olacağını kabul eder. Bu lisans, başkalarının belirli belirtilen koşullar altında telif hakkına sahip çalışmayı ve buna dayalı türev çalışmaları özgürce kopyalamasına, dağıtmasına ve görüntülemesine olanak tanır.

Yazarlar, makalelerinde telif hakkına sahip olmadıkları herhangi bir görüntü veya sanat eserini eklemek veya bu tür herhangi bir görüntü veya sanat eserini makalelerine dahil etmek için yazılı izin almaktan sorumludur. Telif hakkı sahibi, görselin veya sanat eserinin Creative Commons “Atıf 4.0 Uluslararası” lisansı altında makalenin bir parçası olarak çevrimiçi olarak serbestçe erişilebilir hale getirileceği konusunda açıkça bilgilendirilmelidir.

Creative Commons License

Bu eser, Creative Commons Atıf-Ticari Olmayan-Benzer Paylaşım 4.0 Uluslararası Lisansı altında lisanslanmıştır.